P6 Transparent LED Screen Display
P6 Transparent LED Screen Display
Blog Article
Product features
LED | High transmittance | Easy to install | AB version |
light drive in one, independent research and development, high reliability, mini LED device, industry leading | The transmittance is more than 90%, which does not affect the glass daylighting | without steel structure, just stick the thin screen slightly and connect the power signal | |
Flexible | Light and thin | UV resistance | Flame retardanyt |
for any surface | as thin as 3mm, as light as 3.5kg/㎡, | 5~10 years can ensure no yellowing | flame retardant grade V1 |
Product parameter table
Product specification | P6 |
Pixel pitch | 6mm*6mm(x*y) |
Pixel | 27889 points/㎡ |
LED specification | SMD2121 (light drive in one) |
Pixel composition | 1R1G1B |
Module Size | 1000mm*240mm |
Module Resolution | 167*40 |
Pixel resolution | 167*167/㎡ |
Permeability | ≥85% |
Box wiring mode | Internal wiring (clean back) |
Weight | ≤ 3.5KG/㎡ |
White balance brightness | ≥3000cd/㎡ |
Peak power consumption | 600 W/㎡ |
Average power consumption | About 200 W/㎡ (depending on the video source) |
Refresh frequency | ≥3840s |
Grayscale level | 16Bit |
Brightness control level | Grade 0-255 |
Color temperature | 3200K-8500K (adjustable) |
Frame change frequency | ≥60Hz |
Viewing angle | H-H140 degrees V-V140 degrees |
Input signal | DVI VGA, composite video |
Control screen mode | Or synchronous box (computer control screen) or asynchronous box (WiFi connection mobile phone APP control screen, USB flash drive control screen) |
Protection grade | IP30 |
Power supply requirements | AC 220V ± 10%, 50-60Hz, (optional wide voltage 110V and 9-36V) |
working temperature | -20~50 ℃ |
Theoretical service life | 100000 hours |
Breakpoint continuation
Stable performance, support two-way Drive drive-in LED,
When a single point of failure, the backup data signal starts automatically, seamless switching, without affecting the display effect.
High reliability
The fault lamp beads should be kept off. If the connection is abnormal (signal, power supply, ground) inside the chip, the lamp beads
will be extinguished to avoid the phenomenon of steady on and random flashing.
The lamp bead life is more than 100,000 hours
Easy installation
The P6 transparent LED screen display no steel structure is required, just stick the thin screen slightly and connect the power signal Self-developed glue filling process (the screen body with its own viscosity can be directly attached to the glass surface, with strong colloid adsorption, and the viscosity will also increase with the passage of time due to the inherent characteristics of the colloid)
Flexibility
Flexible design: Made of flexible materialsit can be flexibly bent and curved with a minimum diameter of 6cm.
The P6 transparent LED screen display adapting to various curved shapes, such as cylindrical, arc, etcthis gives greater flexibility in design and installation.https://www.wiforfilm.cc/rex-series-flexible-led-film/p6-flexible-led-screen.html
Slim & Flexible For Creative Design
The P6 transparent LED screen display is Ultra-thin and ultra-light, with thickness of the LED film is only 3 mm,
the maximum sheet size is 1000mm*240mm, weight 1.3 kg.
Fine material is very flexible, can be adapted to both flat and curved glass
This gives designers more scope of application and broadens their application occasions.
UV resistance
5~10 years can ensure no yellowing
Flame retardanyt
flame retardant grade V1
Installation diagram and wiring diagram
(same as asynchronous configuration)
(same as asynchronous configuration)
Application Scenarios
What is the pixel pitch of the P6 transparent LED screen display?
The P6 transparent LED screen display features a 6mm pixel pitch, allowing for high-resolution visuals.
What kind of content can I display on the P6?
You can display various content types, including videos, images, and promotional ads on the P6 transparent LED screen display.
Can the P6 transparent LED screen display be used outdoors?
No, our P6 transparent LED screen display products are only suitable for indoor use and only for use on glass and acrylic panels.
What is the viewing distance for P6 LED screen?
P6 transparent LED screen display viewing distance recommended about 3 to 6 meters.